I recently bought an M-Audio Fast Track Pro! soo i was wondering if i can connext it to my 32 channel mixer? - m audio fast track pro
I've recently bought an M-Audio Fast Track Pro! soo I'm wondering if I can my CONNEXT mixing with 32 channels and the recording directly to console?
Saturday, January 30, 2010
M Audio Fast Track Pro I Recently Bought An M-Audio Fast Track Pro! Soo I Was Wondering If I Can Connext It To My 32 Channel Mixer?
Subscribe to:
Post Comments (Atom)
1 comments:
I assume you mean register the mixer through the lane and on the computer. If not, it does not work, you need a computer.
However, some can work with your console, use the inputs on the front. Son combo jacks, which means that XLR or 1 / 4 enable "connections. You did not mention the model number of your console, but I suspect that a principal or alternative uses, 1 / 4" has.
Connect one end of the cable to the left (or # 1) The output of the mixer, then plug the other end in the first inning in front of the speedway. Then take the end of a 1 / 4 "cable and connect it to the right (or 2) you leave the console, then plug the other end into the second leg in front of the speedway.
This is the stereo connection between two devices.
Basically what happens is that they cut "the ability of the current Board of Channel 32, but used to forget that only a combination of stereo left and right channels go into the" computer. This means that you not ablE to the 32 channels, without recording software separately to disconnect (no problem, it just takes more time).
If the mixer / PDIF, you may be able to get more cards, but if you do, you try to the output of the mixer at the entrance to the expressway (S / PDIF). This is knowing mixer comes into play, and most companies have the manual online for free.
One last point - the 1 / 4 "connectors on the rear side of the road, marking the" Insert "are the inputs, the two channels developed in a manner to external devices, such as working, for example, Hall. It does not not trying to cause the entry will benefit not work. Good luck and make sure you know how to configure your software with the expressway.
Salud!
Post a Comment